Call us today for 10% off repairs (service call fees excluded)

Tips And Advice From The Pros When Your Heater Won’t Turn On

Have you ever gone to turn on your furnace on a cold day only to find that it won’t start? This can be a frustrating and stressful experience, especially when you’re not sure what’s causing the problem. If you’re in need of help, don’t worry – there are experts who can assist you.

There are many different reasons why your furnace may malfunction, and it’s important to get an accurate diagnosis from a professional in heating replacement in Kenner, LA. They can help identify the issue and provide solutions to prevent it from happening again in the future.

1. Check The Thermostat's Settings

The heating system will only be activated when the fan is switched on, and the thermostat is set to heat.

If there is a problem with your thermostat’s clock or date settings, it will prevent the furnace from working. If any pre-programmed settings are present, review them and adjust them according to the owner’s manual.

Battery-powered thermostats are common. Change the settings of your thermostat after replacing the batteries. If the furnace comes on, the problem is solved.

2. Check The Circuit Breakers And Emergency Switches

A circuit breaker and an emergency switch, which controls the furnace, should always be checked whenever something isn’t working properly.

You won’t be able to use the thermostat if there is a blown fuse or the emergency switch has been pressed. You can troubleshoot the problem by resetting any tripped circuit breakers. In case of any problem, contact our professionals for heating repair in New Orleans, LA.

3. Clean The Air Filters

You might have a filter issue if you see the furnace is starting but don’t feel any warm air coming out. Hot air cannot easily pass through when the furnace’s air filter is clogged. Air filters should be cleaned or replaced if your system is not responding well. Follow your owner’s manual for instructions on how to clean your furnace filter.

4. Check The Registers

The heating registers could be a problem if some rooms are warm, but others are cold. As you walk through the house, ensure all heating registers are open. The home will be heated by allowing warm air to flow into the rooms.

If your heating system still does not work, call us for quick, professional service for heating replacement in Kenner, LA.

5. Check The ON/OFF Switch

Whether your furnace is in the attic or a utility closet, it should have a power switch that resembles a wall-mounted light switch. Turn the switch back on to restart your heating system since your furnace won’t operate if it is accidentally turned off.

Similarly, the outside wall will have an ON/OFF switch if you have a heat pump. It should be directly adjacent to the exterior unit of your heat pump. Ensure the switch is switched on once more, and you’ll likely need to raise a metal flap to reach the switch. A box keeps it shielded from the outdoors.

If your furnace still won’t turn on after checking everything or if you smell gas or propane, contact Climate Tamers for quick, cost-effective assistance with heating repair in New Orleans, LA.